The binary of the module you are trying to start is probably corrupt. To check if this is the case, run the install procedure, located on the CD-ROM and select the Verify software installation option. The Verify option must be used with a valid install log file (EMME2.log). Such a log file is created when the software is instalLED using the install graphical interface from the CD-ROM. If no log file is available, obtain the checksum of the binary (found in the bin subdirectory of the EMME/2 program environment) using the sum command and compare the result with the corresponding entry in the file sums in your EMME/2 program environment directory. For example:
If the checksum is different, you need to reinstall the binary from the original CD-ROM supplied by INRO.
